|
. |
| |
Air Velocity Calibration
|
| |
|
|
Air velocity calibration services are undertaken in the laboratories' universal wind tunnel, offering extreme accuracy in both low and high speed operating modes. All types of anemometers and wind speed instruments can be calibrated. The facility can offer independent, UKAS accredited air velocity calibration for all types of pitot static tubes and anemometers.
UKAS accredited air velocity calibrations can also be undertaken covering the UKs’ MCERTS requirements for environmental emissions, using type E and type S pitot static tubes.
|
|
UKAS accredited air velocity calibration can also be undertaken covering for the Part L Building regulations under the Air Tightness Testing and Measurement Association (ATTMA) requirements.
The wind tunnel comprises of a variable diameter nozzle for open jet air velocity calibrations in the region of 0.05 to 100 m/s. And can be fitted with an adaptable closed wall system for closed jet calibrations for air velocities below 2 m/s. The reference device comprises of an X, Y, Z automated traverse system with integrally mounted, laser doppler anemometer and servo controlled spinning disc.
|
|
|
The facility offers customers worldwide with one of the most versatile air velocity calibration rigs available. With a wide air velocity operating range, high measurement accuracy, low turbulence and quick calibration turnaround. Customers from the environmental, HVAC and meteorological sectors continue to return, for a world leading calibration service for the calibration of their vane, cup, ultrasonic, thermal hot wire and pitot probe instrumentation. Reverse low flow anemometer calibrations can be undertaken for the calibration of laminar flow cabinets.
|
|
|
 |
For the more specific R&D requirements, constant temperature anemometers (CTAs), 5 hole probes and yaw probes can installed and calibrated in the multi-axis pitch and yaw head, allowing for directional sensitivity calibration for 2D and 3D probes.
Onsite wind tunnel calibration is available to laboratories and test houses upto a 1 metre test section area, although provision for the laser optics must be made available in the tunnel walls.
|
If you have any further questions regarding our Air Velocity Calibration Services you can contact us here UKAS Calibration On Site Calibration Medical Calibration Flowmeter Sales
Component Testing Services Air Flow Calibration Oil Flow Meter Calibration Water Flow Calibration
Pressure Calibration Humidity And Temperature Calibration Electrical And Mechanical Calibration Air Velocity Calibration
|
|
|
|
|
