Service and Calibration now available for precision mass flow meters and controllers from Analyt-MTC, Roxspur, Omega, Cole-Parmer and Alicat
Service and Calibration available for AVL 415 and 415S smoke meters
Additional 600 litre/min oil flow calibration rig commissioned for higher viscosity oil calibrations
Low flow pure water calibrations now available from 0.5 litre/hour
1 Comment » Latest firmware updates are now available for the range of BGI air flow calibrators. TetraCal, DeltaCal, HiVolCal and Challenger are now available with the latest entirely new firmware operating system called Primecal. It offers an outstanding selection of user selectable measurement parameters and it will be applied to all calibrators, present and past. It is accompanied by a completely new software package, BGIOpenCal which is nevertheless applicable, in its graphical function, to calibrators that have not yet been upgraded.
Leave Comment » The laboratory can undertake cleaning and calibration of the Sierra Instruments range of gas flowmeters, these include the new Smart Trak 2, Smart Trak, Micro Trak, Top Trak, Side Trak and Max Trak. Flow calibration is available from 1 cc/min to 1000 l/min. UKAS accredited calibrations are available 0.2 l/min to 350 l/sec
Leave Comment » To summarise the latest additions to the Young Calibration Laboratory please click links below:
* ISO 16232 Component cleaning facility commissioned
* Sameday calibration now available for 17th Edition test meters
* Humidity calibration available across a temperature range of 0 to 60 Deg C
* Win VIP Hospitaility Executive Box tickets for Brighton & Hove FC, at the new Amex Stadium
* Welcome to, two new employees, Tony and Tom joining the Calibration team.
4 Comments » Laboratory updates for the air flow calibration facility, include the full service and calibration of BGI Flow Calibrators, Alicat Mass Flowmeters, AVL 442 Blowby Meters and ECM / Labcell Blow-by Meters. Updates for the liquid calibration facilities include the service and calibration of turbine flowmeters and HPLC flow calibrators.
2 Comments » A complete range of blowby meter calibration services can be covered in the Young Calibration laboratories. This include full service, clean, and calibration of AVL, ECM, J-Tec, NTK, Platon, Roxspur, Dew Systems, Scheme and Toceil meters. All meter types can be calibrated from orifice, venturi, vortex and positive displacement meters. Contact Young Calibration for the latest service details available on engine blow-by meters.
3 Comments » Service and Calibration is now available for the Alicat range of gas mass flowmeters. Flow calibrations can be undertaken on air, from 1 sccm upto 1000 slpm.
2 Comments » Young Calibration can now offer the calibration of the Rotronic HygroPalm and HygroLog units using the latest Airchip 3000 generation sensors, such as the Hygroclip HC2-S probes. Traceable calibration against the laboratory reference chilled mirrors and in-house HumGen Calibrator covers 5 – 95% RH.
For more information on humidity calibration please call 01273 455 572
2 Comments » Young Calibration are now an approved Service and Calibration provider for the BGI environmental flow calibrators. UKAS accredited calibration can be undertaken on the complete range of BGI Flow Calibrators, including DeltaCal, TetraCal, Challenger and the HiVolCal.
3 Comments » Recent expansion to the laboratory services include the UKAS accreditation approval for onsite calibration of pressure, voltage, current, resistance, frequency and thermocouple electrical simulation parameters.
7 Comments »