Traceable pneumatic pressure calibrations can now be completed upto 200 bar. UKAS Pressure calibrations can be completed up to 20 bar pneumatic and 1100 bar hydraulic. Calibrations are undertaken on a range of Mensor, Druck, Ruska and Degranges & Huot systems.
For more information on pressure calibration services contact Young Calibration Services.
5 Comments » 
A recent contract award for the calibration of over 100 Gemini and Macnaght oval gear meters was secured by Young Calibration Services. The various size Gemini / Macnaught flowmeters, covering G05, M05, G1, M1, G2 and M2 models are to have multi point calibrations on the customer fluid, being a flavoured essence.
9 Comments » 
Young Calibration Services extends its’ ISO 17025 accreditation services for the calibration of low flow gas meters. All types of air flow calibration meters are covered, including, thermal, variable area, coriolis, laminar flow, turbine and orifice meters. UKAS accreditation covering o.2 – 800 lpm (volume or mass flow based) with a best measurement uncertainty of 0.5%.
9 Comments » The UK’s best accuracy accredited air velocity calibration instruments across 10 – 80 m/s is based on the south coast of England. The facility has a total coverage range of 0.01 m/s to 100 m/s. UKAS accredited calibrations from 0.05 to 80 m/s for thermal anemometers, pitot tubes and vane anemometers. 
With a multi-variable tunnel concept, the optimum tunnel size can be used to minimise installation and instrument blockage effects, ensuring the customer receives the optimum calibration of their device. The facility utilises a laser doppler anemometer for all its air velocity measurements.
65 Comments » How many thermal anemometers actually provide air velocity calibration readings at standard reference conditions, rather than actual test conditions. Most late model units do provide this facility and this is clearly described in the operations manual. But what about older model types?
12 Comments » 